SMD Multi Colored Digital LED Strip Lights With High Shock Resistance And Good Consistency

4 Colors in 1 Digital LED Strip Light 5050 SMD LED 94LED / M - SK6812 RGBW RGBWW LED Strip

Feature :

· RGBW = RGB + Cold White (6000-7000k),RGBWW= RGB + Warm White (2700-3200k),RGBNW= RGB + Natural White (4000-4500k),RGBW = RGB + Cold White (6000-7000k),WWA = White + Warm White + Amber

· LED source :5050SMD RGBW/WW/WWA built-in SK6812 chip

SK6812RGBW/RGBWW/RGBNW is a smart LED control circuit and light emitting circuit in one controlled LED source, which has the shape of a 5050 LED chip. Each lighting element is a pixel, and the intensities of the pixels are contained within the intelligent digital interface input. The output is driven by patented PWM technology, which effectively guarantees high consistency of the color of the pixels. The control circuit consists of a signal shaping amplification circuit, a built-in constant current circuit, and a high precision RC oscillator. The data protocol being used is NRZ communication mode. The 32-bit data is transmitted from the controller to DIN of the first element, and if it is accepted it is extracted pixel to pixel. After an internal data latch, the remaining data is passed through the internal amplification circuit and sent out on the DO port to the remaining pixels. The pixel is reset after the end of DIN. Using automatic shaping forwarding technology makes the number of cascaded pixels without signal transmission only limited by signal transmission speed. The LED has a low driving voltage (which allows for environmental protection and energy saving), high brightness, scattering angle, good consistency, low power, and long life. The control circuit is integrated in the LED above.

SK6812 RGBW Programmable LED Strip Light Description :

· SK6812 LED strip, 16.4ft 300 LEDs, Tube waterproof IP67, white PCB, R/G/B/W 4 color in 1LED. It is the upgraded version of WS2812B LED.

· 256 brightness display and 32-bit color display. Each pixel can have its own color and brightness. You can control them individually and set them to any color or animation you want.

· Works great with ready-to-go library & example code for the Arduino UNO / Duemilanove / Diecimila, Flora/Micro/Leonardo, Trinket/ Gemma, Arduino Due & Arduino Mega/ADK, Fast LED library and Raspberry Pi.

· Comes with 3pin JST-SM connectors and separated power/ground wires on both ends. Each LED can be cut off without damaging the rest strip. You can shorten, lengthen or bend it freely if you want.

· Covered with clear silicone weatherproof sheathing, which protects it very well and makes it easy to clean. It also comes with some silicone clips and screws for easy installation.

Parameter :

Dimension :

Picture :

led multicolor strip lights

digitally addressable led strip

SMD Multi Colored Digital LED Strip Lights With High Shock Resistance And Good Consistency Images